Chlorine, Sulfur Dioxide
from 0.6 pounds/day (12 g/hr)
up to 500 pounds/day (10 kg/hr)
Ammonia
up to 50 pounds/day (1000 gr/hr) |
Suitable for fixed and mobile installations. Available versions:
DRAINAGE: for clean or slightly contaminated water, effluent of limited solid load.
SEWAGE: for contaminated water with solids including long fibres.
Explosion-proof with EEx dIIB T3 protection, manufactured in cast iron stainless steel or bronze are available on request |
 |
LC1 SK mini-contactors for motor in category AC-3.
LC1 SK and LP1 SK mini-contactors for motor in category AC-1.
|
LC1 SK mini-contactors for motor in category AC-3.
LC1 SK and LP1 SK mini-contactors for motor in category AC-1.
|
 |
With BMX EHC 0200 module, 2 channels, 60 kHz, to be ordered separately:
- a BMX XTS HSC 20 kit containing two 16-pin connectors and one 10-pin connector
- a BMX XSP 0400/0600/0800/1200 electromagnetic compatibility kit.
|
Catalog Data Sheet Hi-Temp 75
Leads: 8" Inch Leads
Voltage: 460/380
Phase: 3-Phase |
 |
Catalog Data Sheet High Thrust
Leads: 4" Inch Leads
Voltage: 230
Phase: 1-Phase |
Chlorine, Sulfur Dioxide
from 1.5 pounds/day (30 g/hr)
up to 100 pounds/day (2000 gr/hr)
Ammonia
up to 50 pounds/day (1000 gr/hr) |
 |
Chlorine, Sulfur Dioxide
from 4 pounds/day (75 g/hr)
up to 100 pounds/day (2000 gr/hr)
|
Single-stage centrifugal pumps with open anti-clogging impeller with wear plate.
Drive options include flange for internal combustion engine, tractor PTO gearbox or bareshaft versions for electric motors and engines.
Available with a chopper device and manual or mechanical priming system.
|
 |
TeSys T is a motor management system that provides protection, metering and monitoring functions for single-phase and 3-phase, constant speed, a.c. motors up to 810 A
|
The UF 322 L exists in several models from 1 to 6 chords (1 chord=1 pair of probes). UF 322 L-1 : 1 chord, UF 322 L-2 : 2 chords
|
 |
The UF 322 G is a modern, accurate and reliable instrument for your gas flow measurements. |
RPF power relais, with 2 C/O or 2 N/O contacts comprise:
- Four or six Faston type pins.
- Two relay supply pins.
- A locating slot for mounting on DIN rail.
- Two fixing holes for panel mounting.
|
 |
The following accessories are available for the RPM plug-in power relay range:
- 15 A relays with 1, 2, 3 and 4 C/O contacts...
|